August 4th, 1999, 11:35 AM
-> Go to the Asus website, download the manual, read the manual.
-> Go to the Intel website - there you will find all the white papers on pin assignments for all Pentium CPU's. How you pull the voltage off of the socket is the poser - you might just be able to run the board w/o the CPU.
-> A CPU uses the same amount of power no matter what the voltage is. Power=voltage*current. Voltage goes down, current goes up. A 100 watt bulb at 120 volts uses around 0.83 amps. A 100 watt bulb at 12 volts uses 8.3 amps. That's why a table lamp can use 18-ga wire, but your KC Daylighters need 12-ga wire and a 20A fuse.
...hope this helps...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)