running k6-2 400 @ 450
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 5 of 5

Thread: running k6-2 400 @ 450

  1. #1
    Join Date
    May 1999
    Location
    Tempe,AZ,US
    Posts
    46

    running k6-2 400 @ 450

    I have a amd k6-2 400 and i have heard of many people getting uit to 450 but i cant. I have tried changing the voltage to 2.3 and i dont know what else to try. Any ideas?
    AMD kicks @$$, Intel bites @$$

  2. #2
    Join Date
    Jun 1999
    Location
    State College, PA
    Posts
    632
    Mine runs rock stable at 450MHZ 2.3V. Change to 2.4v and see if it runs stable. I mean run starcraft with all the cheats and 8 players. If it does not bounce you out of the game after 1 hour, it is stable. What kind of mobo do you have? Also get alpha cooler from www.2cooltek.com One guys told me that there was a 17C' improvement! I am getting it in 2 days.

    Good luck

    ------------------
    PIII 650@806
    PC133 128MB ECC
    ABIT BE6
    TNT2 Ultra
    WD SCSI2 10K 5.2ms 18.3G
    Vortex2 w/ digital out
    Sony MHC-5500 Digital Signal Processer - 30 equalizers and Dynamic Sound

  3. #3
    Join Date
    Jul 1999
    Location
    Oxford
    Posts
    7
    I have a K62 400 that is clocked up to 450. The motherboard is well cheap and only goes to 450. The voltage has to be at 2.4 to make it stable. I am using a very cheap standard+heatsink fan. It could definately do with some more cooling as it is starting to smell a bit burnt but otherwise running fine with no lock ups.

  4. #4
    Join Date
    Jul 1999
    Location
    bern, swizerland
    Posts
    12
    mine runs very well on 450
    2.3 volt
    mb/ GA-5AX, Giga-Byte
    no special fan/cooler, but i ordered alpha cooler and a 3dfx fan, i hope to reache 475 (500) then.

  5. #5
    Join Date
    May 1999
    Location
    Tempe,AZ,US
    Posts
    46
    i guess ill just try again then. I have an ax59pro motherboard if that helps at all. Is that a pretty good MB
    AMD kicks @$$, Intel bites @$$

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •