Hello all, I have a dilemma that could easily be fixed if I throw money at it but, I would prefer not to...
I have a system that has only been assembled in May of this year.
I think my problem is that the 5 volt stand by line (5Vsb) coming out of the power supply is only in the range of 4.44v to 4.66v.
This causes the power button on the case to just generally not work. Of course I've been fiddling with it and have gotten it started but my fiddling (clearing CMOS, unplugging for awhile, checking connections, etc) cannot be replicated each time to get the thing started. I can restart fine. When shutting down and immediatly turning on I get nothing.
I was wondering if anyone had any suggestions that I might try to fix the computer.
1. I purchased a generic ATX case mailorder so I can't just go back to the company to easily.
2. I don't have an ATX powersupply laying around to try out.
3. This topic was originally posted in SUPPORT but received no responses.
Have you tried measuring the +5 stand-by voltage when the power connector is out of the motherboard? I know that it will not read any of the other voltages but if the syand-by voltage is the one that turns on your system then you should be able to get a reading when it is disconnected from the motherboard. If the reading is higher (more to spec) when it is disconnected then it could be a motherboard loading problem (or purhaps also a power supply problem because it can not handle the load). I regret that I am at work now and I can not make similar measurements on my system to assist you. I will try to check back on this thread later.
Best of luck to you!
Current Main Rig:
AMD FX55 @ 2.9 GHz
2 GB PC 3200 DDR RAM
ABIT KN8 SLi motherboard
ATI X1900XT O/C to XTX speeds
swank i agree with Dimarini bout the p.s. thing ****..why pay 60 for the p.s. when u can get a new atx mid for that...if your gonna replace the p.s. just buy a new case...
supplies are a rip-off alone...
Yeah, but I just spend $35 on a case two months ago. I guess I shoulda at least spent $55 so I wouldn't have this problem.......
Yes, power supplies alone cost as much as a case with power supply when you go non-internet. The other problem, for those of use that have no loyalty to 'local computer stores', is that they are selling generic cases with power supplies for double what you can get them on the internet. Although, my situation is a perfect example of why you should buy local. In this case, I wish I had purchased local so I could easily return it. But, how many times have you heard of power supplies going bad?
I guess I will borrow a power supply of a friend, hopefully this evening.
(If this problem is fixed with a new power supply, pricewatch has a good selection for approx $25 shipped.)
[This message has been edited by swank (edited 07-28-99).]