Type: Posts; User:
Do you perhaps mean the cards are not assigned ACCESS groups? In the card database (Config, Cards, Browse Database), on the "Access" tab there is a place to assign up to 5 access groups. This is...
February 18th, 2013
I know of no way to bypass the installer password. If you install the software on a different computer, there is an option in the wizard to connect to an existing panel and upload all information....
February 13th, 2013
It's possible the user you log onto the software with had limited visibility. If you aren'y already, try loggin in as the installer (default user name and password is "installer"). I've included...
February 11th, 2013
Well, the only panel that stores the card data is the MLB. It makes me wonder that people came out and didn't find anything wrong with the system losing cards. If they worked, they were in the...
February 11th, 2013
The Host ID is the number that is assigned so the panel could not be connected to by a computer that did not have the same ID # .It is described on page 12 of the quick start guide. You can find out...
February 6th, 2013
The Exp counts has to do with Usage Expiration. You can set the card to expire and no longer work after a certain date or a certain number of uses. And it refreshes it's information every day. If you...
January 13th, 2013
The MLB is the only device that stores the database. The DCM receives the card read, then relays the information to the MLB, which makes the access granted/denied decision, and tells the DCM. Check...
November 21st, 2012
Sorry, I never had to use dial up for the Pass Point panel, so I'm afraid I'm not going to be very helpful. I found this for modem commands, and it mentions &D0 through &D3 for DTR settings. Don't...
November 19th, 2012
I got this text from tech support some time ago (had an email on it I hadn't used in about a decade. Hope it helps Text File
November 15th, 2012
I want to go over the Windows Swap File (one more time). I'm now running Windows 7 64 bit, with 24GB of RAM. I run a memory usage app, and it consistantly shows I never really use even HALF of my...
August 9th, 2012
August 8th, 2012
Here it is I turned off my server
October 8th, 2000
Ok... go to Start, Settings, Control Panel... look in the Control Panel for the Multimedia Icon... open it, and under the Audio Tab, at the bottom, there is a check box with "show Volume...
August 3rd, 2000
Well, I tried that. Didn't work. Not only that, but when I slid the mixer 100% to the rear, the front speakers showed no signs of fading out at all. Any more thoughts or ideas? I'm all ears ...
August 2nd, 2000
Ok, I'm probably missing something, but how do I enable the rear speaker output on my sound card? I know it works, because when I test the four speaker setup, I can hear the test message through the...
September 23rd, 1999
UPDATE: Solved the problem. It was the commands in the autoexec.bat. Thanks for the attention
September 22nd, 1999
I am building a new system, and it had an AIW 128 AGP. I added a SB Value Live, and I am having trouble with the TV tuner. It will begin normally, but the TV display freezes, and the machine locks...
Ok, I've got a little strange of a question. A PCI modem has no onboard controller chip, it uses a windows based file instead. Is a PCI based sound card the same? does it use an onboard controller...