I just bought a zip parallel port drive. When I installed it under Windows98 I couldn't ge it to work with my CD-ROM drive. It has to be one or the other. Is this a problem with the VIA MVP-3 super seven chipset? It seemes thae Windows98 wont let me change the drive letters for either device
both want to be drive: E Why is this
If I were you I would take the parallel port drive back and get a retail ide ATAPI Zip drive(unless you need the parallel port one for mobility sake).They are very easy to install and even come with a video tape that shows you how to do it. The ide reads much faster than the parallel port one. Going this route might also solve your problem.
OKay, to make sure tehy don't fight over drive letters, do this:
1.) Go to Control Panel
2.) Go to System
3.) Go to Device Manager
4.) Click on CD-ROM Drives
5.) Highlight your CD-ROM and click properties.
6.) Click Settings.
7.) Under Reserved Drive Letters, select E: for both Start & End.
8.) Click OK (If asked to reboot, say no)
9.) Click Disk Drives
10.) Highlight IOMEGA ZIP 100 and click properties.
11.) Under Reserved Drive Letters, select F: for both Start and End.
12.) Click OK.
This locks the CD-ROM and ZIP drives to a specific drive letter so they don't fight it out instead. Also, go to IOMEGA's site and get all the updated drivers.
I agree w/t Zeddicus, return the drive, but i must say get the Zip+ drive. This one can act as a parallel device for PC or a SCSI device for PC/MAC.
much more mobility!
my rule of thumb:
where ever possible, get SCSI (or USB).