Anybody have the Vantec FCE-62540D been doing some research and I heard it performs well but is a little loud. If anybody knows the bad or the good let me know?
Vantec FCE-62540D
Printable View
Anybody have the Vantec FCE-62540D been doing some research and I heard it performs well but is a little loud. If anybody knows the bad or the good let me know?
Vantec FCE-62540D
it has a very very good clip. tool less and it doesnt hurt your fingers either. not as strong as a cooler than some of the newer heatsinks, but it is still a good performer.
------------------
Visit my website!
look for me on AIM as gosanjose or on ICQ as #46997155
The things I've read about it also say it performs well, but I've never tried it. If you do try it out, let us know how it does! http://discussions.hardwarecentral.com/biggrin.gif
------------------
Duron 700@920 (115FSB*8x)
Abit KT7 RAID
256mb Crucial @ CAS2
(2)Maxtor Diamondmax+ 7200rpm ATA100 30GB@RAID 0
Hercules Prophet II MX 200/200
HP9110i Burner
Delta 50x CD-Rom
http://members.tripod.com/athlon100/index.htm
Thats the cooler I have on my Duron 750 , MSI K7T turbo. I would have to agree the clip is good. Using radio shack thermal paste, I never get above 38c running benchmarks. Of course my core is only set to run at 1.5 If I bump the vcore up, temps climb quickly. I would have to rate it as ok for a stock machine but inadequate for a overclocker. I lapped it, I ducted it I put a 1 watt 15k ceramic resistor inline to knock rpm down to 5500 . Its nice and quiet, but not a top notch performer.
