Help needed overclocking a Celeron 366
Hey guys and gals,
I just built a system with a Celeron 366 and an Asus P2B-F motherboard. I can't overclock it for anything. I've tried different jumper settings, and used a Desktop Management Interface Utility supplied by ASUS to no avail. The BIOS won't let me change it, however, the DMI will. I then tested system speed with Wintune 98, and it still said speed was at 368 mhz. The jumpers don't do anything really, either it boots at 366 or it doesn't boot. It seems that if I change the bus speed to 100mhz it won't boot. Any ideas? I'd appreciate it. Either respond here or email me at firstname.lastname@example.org. Thanks in advance.